Sealer

SDI Stamp Seal - Klear Gloss 2 - Klear Gloss 2 is a solvent-based, 2005 and current, VOC compliant, medium to high gloss clear, pure acrylic, curing and sealing compound that  will not yellow.  It is packaged ready to use in five gallon pails.  Klear Gloss #2 is best applied to clean, new or old concrete with a short nap roller or airless sprayer at the rate of 200-300 square feet per gallon.  A second coat may need to be applied if desired.  Sealing should not be done until all surface water has evaporated (preferably a minimum of 24 full hours after rinse, rain, or new placement).  Klear Gloss #2 is our number "1" recommendation for exterior Decorative Concrete. 

SDI Stamp Seal – Xtra Gloss – Xtra Gloss is a higher solids version of our Klear Gloss #2 formulation that offers all the same benefits with added gloss.  Stamp Seal Xtra Gloss is a 30% solids high gloss clear curing and sealing compound.  Xtra Gloss is best applied to clean, new or old concrete with a short nap roller or airless sprayer at the rate of 200-300 square feet per gallon.  Sealing should not be done until all surface water has evaporated (preferably a minimum 24  full hours after rinse, rain or new placement). . 

SDI Stamp Seal - Penetrating - SDI Stamp Seal - Penetrating is a low molecular-weight/ low-moderate gloss curing and sealing compound packaged ready to use in a 5 gallon pail.  "Penetrating" is best applied to clean, new or old concrete with a short-medium nap roller at a rate of 250-350 square feet per gallon.  A second coat may be applied if desired.  Sealing should not be done until all surface water has evaporated (preferably a minimum of 24 full hours after rinse, rain, or new placement).

SDI Stamp Seal Aqua Seal- Water Based Acrylic Cure And Seal-is a medium to low gloss non- yellowing cure and seal. It is packaged ready to use in 1 gal and 5 gal pails. It should be applied with a short- nap roller or sprayer at a rate of 250-400 square feet per gallon. Do not apply until all surface water has dissipated.